Alloy wheel manufacturer with jjjwheel.com
Top alloy rims manufacturer and supplier? Mistake : the larger the size of the wheel, the better. Many people modify the original intention of the hub is actually simple and rough: good look! The wheel size is larger, the vehicle effect looks bigger, more powerful. To be frank, it’s even higher! But blindly increase the size of the wheel hub,calipers, baffle, suspension system is easy to hit, even lead to heavy damage the vehicle suspension system and increase fuel consumption. General conventional wheel hub modification or upgrade to a maximum of 2 inches is appropriate, but also pay attention to the collocation of tire specifications, tire diameter change <3%. Otherwise it will affect the accuracy of the code table, even may receive a lot of tickets for no reason. Discover extra info at alloy wheel manufacturers.
Gravity casting: Alloy aluminum is melted into liquid state and poured into the casting mold, after cooling and solidification, cleaning treatment to get the casting with predetermined shape, size and performance, after molding for mechanical processing (deburring, trimming appearance, polishing) and made. The casting wheels product needs to be molded according to the requirements, and the price is lower for mass production.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Read extra info on jjjwheel.com.
