Oxford plasma cutter top online shopping

Oxford welder best online shopping: Welders with a higher power output can work with thicker metals, but higher voltage welders will require special power supply set ups—either generators or appropriate power outlets. A welder with lower voltage in the 100’s will not be able to handle heavy duty jobs, but it can be plugged in and operated from any outlet. Any welder with power over 200 cannot run off a typical power outlet and will naturally cost more to run. In addition, welders will either run an alternating current (AC) that reverses itself at regular intervals or a direct current (DC) that flows in one direction and does not reverse itself. DC offers a steady rate of energy that leads to hotter temperatures and deeper weld penetration. AC welders usually cost less than DC welders, but the available electrodes are far more limited for AC. In fact, DC welders are more costly but remain popular because their higher power offers a wider selection of electrodes and a number of working advantages such as: simple arc striking, better penetration, and improved control. Welders who expect to work on a wide variety of projects may want to consider an AC/DC combination welder.

Also a good quality basic MIG machine is electrically efficient in design so power consumption is about as low as it can go. Have a look at our single phase & three phase standard MIG range, Oxford MIGMaker, Oxford I-MIG, Oxford S-MIG. These models are really electrically efficient which means we can give you more output power for lower input. There are also many other quality made European & USA made machines you can consider, however we recomend avoiding the low cost imports, despite giving the impression of being made in the EU etc mostly the low cost machines are now made in the Far East, even some a the big names have gear made in Asia, they often weld quite badly & are not built to last. If you need a MIG welder with portability is the number one priority then we suggest consider a quality EU or USA made inverter machine. But beware, as many users know inverter based machines are not particuarly reliable or have a long life, (more on this subject to follow). See a few extra details on Oxford Plasma Cutter.

Never forget that welding, when done improperly, can be hazardous. Electric shock, fumes and gases, arc rays, hot parts, noise and a host of other possible hazards come along with the territory. The ultraviolet and infrared light rays can also burn your skin – similar to a sunburn but without the subsequent tan – and your eyes. This is why the best MIG welding operator knows how to stay safe. Following some simple tips can help you take your MIG welding operation to the next level and ensure you are as safe, efficient and professional as any other shop. Welding helmets, gloves, close-toed shoes and clothes that fully cover exposed skin are essential. Make sure you wear flame-resistant natural fibers such as denim and leather, and avoid synthetic materials that will melt when struck by spatter, potentially causing burns. Also, avoid wearing pants with cuffs or shirts with pockets, as these can catch sparks and lead to injuries.

Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient. See even more info at www.weldingsuppliesdirect.co.uk.