Corrugated flexible conduit buying advices
Looking to purchase the best stainless steel flex conduit? Here are some advices and extra details helping you to make the best choice.
Conduit is a type of tubing that you can feed your cable through, it can be made up of plastic, fibre or metal. Electrical conduit can provide the structure, cable protection and support for the cable you run through it. Electrical conduit is a safe and tidy solution when installing single or bunched cable together. Cable conduit is the perfect solution to support the installation of electrical cable, running cable underground, through walls or when cabling needs protection in an exposed area.
The general procedure for using thin wall conduit is similar to the use of steel armor cable. The big difference is that conduit cannot be “snaked” through openings in ceilings and walls. You must have full access to joists and studs to install electrical conduit. So you probably won’t want to use it unless your local code requires it. IMC is typically used in hazardous locations, and in its stainless steel formulation, IMC is widely used in the food and beverage industry, in chemical plants, in cosmetic and pharmaceutcial industries, in refineries, in pulp and paper mills, in marine and coastal sites, in other corrosive environments. An advantage of IMC is its larger interior diameter compared with RMC of the same nominal sizes, making it easire to pull wires. Read extra info at Stainless steel flex conduit.
Flexible metal conduit is best known by its nickname “Greenfield,” for its inventor, Harry Greenfield. It is a spiraling metal tubing that bends easily and is commonly used for short, exposed runs in household circuits, such as connections for garbage disposers, hot water heaters and furnaces. FMC is suitable for dry locations only and must be supported every 4 1/2 feet and within 12 inches of each electrical box. It can be used as a ground path only with approved fittings and only where flexibility is not an issue after it is installed. For example, if it’s connected to a motor that vibrates, the conduit cannot be used for grounding.
Flexible metallic conduit (also known as FMC) can be a practical choice for the large construction projects, for example building the underground car park. This particular conduit relies on interlocking metal coils to produce a long tube that lets the wires move through. By interlocking the individual pieces it can be possible to make a very flexible material. It really is practical to the installation protects that take place in a dry environment, but needs to be avoided if you have a risk of the water penetration.
Intermediate metal conduit, or IMC, is a thinner, lighter-weight version of rigid metal conduit and is approved for use in all of the same applications as RMC. Because IMC is lighter and easier to work with than RMC, it is more common in new construction. Another example of a rigid electrical conduit is EMT (electrical metal tubing), which is most commonly made of galvanized steel but can also be aluminum. EMT is also called “thin-wall” conduit because it is thin and lightweight, especially compared to RMC. EMT is rigid but can be bent with a simple tool called a conduit bender.
CorrugatedConduit.com is a leading supplier of flexible conduit located in Kowloon, China. We have 15 years cooperating qualified manufacturer in mainland. Because of our good quality control management and large volume we are able to sell you the best flexible conduit at competitive prices. Source: https://corrugatedconduit.com/.
